Class10.9 Flange bolt for Automotive Dacromet

Dowson's Fasteners is a seasoned producer and provider of Dacromet-coated Class 10.9 Flange Bolts designed for automotive applications. With over three decades of dedicated progress in this industry, we boast a rich history of expertise. Our offerings have earned accolades from numerous clients in both the US and South Korean markets. We've consistently strived to strike a harmonious equilibrium between cost-effectiveness and top-notch quality, empowering our patrons to sustain a competitive edge.

Send Inquiry

Product Description

Class10.9 Flange bolt for Automotive Dacromet

Class 10.9 Flange Bolt for Automotive Dacromet is a high-strength fastener designed for use in automotive applications.

This flange bolt is made from a heat-treated carbon steel alloy and is precipitation-hardened to achieve its specified strength class. The Class 10.9 specification indicates that the bolt has a tensile strength of 1,040 to 1,240ksi (kilopounds per square inch) and is capable of withstanding high levels of stress and torque.

The flange bolt is designed with a hexagonal head that allows it to be easily engaged and tightened using a wrench or other tool. The shank of the bolt is threaded and typically engaged with a corresponding nut to secure the components being fastened. In addition, a hole is drilled through the center of the flange, allowing for the insertion of a fastening wire or other suitable means of attachment.

The Dacromet coating applied to this flange bolt provides a protective layer that prevents corrosion and wear, enhancing its durability and longevity in harsh automotive environments. Dacromet coating is a zinc-based conversion coating that forms a layer of zinc oxide on the surface of the steel, protecting the underlying material from rust and corrosion.

This Class 10.9 Flange Bolt for Automotive Dacromet is commonly used in a variety of automotive applications, such as engine assemblies, transmission systems, suspension components, and chassis structures. It is designed to provide a reliable and long-lasting fastening solution that can withstand the demanding conditions of the automotive industry.

When installing this flange bolt, follow the steps below:

1. Select the appropriate size and length based on the requirements of the application.

2. Clean the surfaces of the bolt and components to ensure good contact and prevent corrosion.

3. Position the corresponding nut onto the end of the flange bolt and align the threads.

4. Insert the fastening wire or other suitable means through the hole in the flange.

5. Apply a thread lubricant (optional) to ease installation.

6. Firmly twist the flange bolt into place using a torque wrench or other suitable tool.

7. Tighten the flange bolt until it reaches the desired torque value specified by the application.

Overall, the Class 10.9 Flange Bolt for Automotive Dacromet provides a reliable and cost-effective solution for fastening applications where high strength, durability, and corrosion resistance are required, and a fastening wire or other similar means of attachment is necessary.